|
Thank you for choosing TeleEye M-303 M-Monitoring
Solution. Please follow the following guidelines
to download and install the TeleEye M-303 into
your mobile phone.
|
| |
|
| 1. User Menu |
Download a copy of the TeleEye M-303 User Manual
at here
or
download a copy of the CAMERIO M-303 User Manual
at here.
|
| 2. Activation code |
Ensure you have received the 12-digit activation
code of the M-303 software.
|
| 3. Approved Mobile
Phone |
Check of the mobile phone for installing the
M-303 is on the approval
list. (P.S. The M-303 cannot guarantee proper
operations on mobile phone models out of the approval
list.)
|
| 4. Data Service |
Ensure you have subscribed GPRS, EDGE or 3G data
service on the mobile phone.
|
| 5. M-303 Download
|
Use the mobile phone and go to wap.teleeye.com/m303.wml
(for TeleEye) or wap.camerio.com/m303.wml
(for CAMERIO) to download and install the M-303
(P.S. If the mobile phone fails to reach the above
WAP site, please try to access other WAP sites
such as www.google.com to ensure proper setup
of data service on the mobile phone. Contact your
mobile operator if any assistance on the network
setup is required.)
|
| 6. Transmitter Registration |
Register the transmitter information into the
M-303 if the registration checking feature has
been activated on the RX transmitter. Please refer
to M-303 User Menu for detailed procedures.
|
| 7. Video Monitoring |
Create a connection entry on the Phone Book of
the M-303, connect to the RX transmitter and start
video monitoring. Please refer to M-303 User Menu
for detailed procedures.
|
| 8. RX Compatibility |
The M-303 currently supports all RX364, RX368
and RX3616 models with firmware version 3.04.00
or above.
- The firmware version of your RX transmitter
can be found on the OSD menu by clicking "Menu"
-> "Transmitter Information".
- If the current firmware in your RX transmitter
does not support M-303, it can be upgraded by
downloading the latest firmware at here.
Follow the instructions on the TeleEye RX Installation
Guide (can be downloaded at here
for TeleEye and here
for CAMERIO) to upgrade your RX transmitter
to the latest version.
- After the firmware in your RX transmitter
has been upgraded, it is suggested to download
and install the latest version of WX-30 from
here.
|
Download